Projects Lab, Chemical Engineering, University of Utah
Rubric for CH EN 4903
Tables of Reference & Appendixes
← View Formal Report II Rubric
| 5% - |
Table of Contents, Figures, and Tables: Correct page numbers used; all figures, tables and sections listed; titles the same as they are in the text. |
| 5% - |
Table of Nomenclature: All symbols used are listed in proper order, briefly described, and listed with the associated units. |
| 15% - |
References: All references used in the text are listed in an appropriate order and style. All the needed information is accurately included. |
| 10% - |
Appendix, Raw Data: Raw data is provided in either tabular form or as attached digital media. Units are made clear. |
| 20% - |
Appendix, Sample Calculation: Enough information given so that a chemical engineering student at another university could easily check the calculations used to obtain one data point in each figure and table with a calculator. |
| 10% - |
Appendix, Calibrations: Data for all calibrations performed are shown and presented in such a way that a reader could adequately judge the performance of the calibrated equipment. |
| 10% - |
Appendix, Equipment and Materials: Detailed information about each piece of equipment and chemical used is given (model, purity, dimensions, and so on). |
| 25% - |
Appendix, Error Analysis: All independently measured experimental quantities are listed and assigned an appropriate uncertainty. Error propagation is performed and the principle sources of error in the experiments are identified. |
Primary Rubrics for This Semester:
